Platform

The Vioneta Stack

Five products. One platform. From the field to the cloud.

Explore the Products Talk to Us
Edge Computing

VEDGE — The Brain
That Lives on the Farm

An edge computing platform running on a small device in the barn, pump house, or greenhouse controller cabinet. It connects to every sensor, runs automation locally, and works without the internet as a first-class experience.

16 Industrial Protocols

Modbus RTU/TCP, MQTT, REST, BACnet, OPC-UA, CAN bus, CoAP, GPIO, SNMP, DDS, EtherNet/IP, and more. Every sensor, valve, and controller speaks its native language.

Edge Rule Engine

Automation engine running 100% on the device. Customers create automations through the mobile app. Cloud operators deploy and manage complex flows from VCLOUD — all running locally on the edge.

Runs Locally in Milliseconds

Zero cloud dependency for core automation. Decisions happen at the edge with sub-100ms latency — faster than any cloud round-trip.

Offline-First Architecture

Works without internet as a first-class experience. Not a degraded mode — the same intelligence, the same automation, zero cloud dependency.

Data Retention & Sync

Configurable local data retention on the edge device. When connected, syncs to the cloud on your schedule — control what syncs, compression, and bandwidth.

Device SDK for Custom Protocols

Need a proprietary or custom protocol? Use the Device SDK to write a device service that connects to the entire Vioneta stack — sensors, automations, cloud sync, and analytics.

Get Started

16 Industrial Protocols

Every device. Every manufacturer. Connected.

Modbus RTU
Modbus TCP
MQTT
REST
BACnet
OPC-UA
CAN Bus
CoAP
GPIO
SNMP
DDS
EtherNet/IP
HTTP/WS
TCP/UDP
Serial
4-20mA
Industrial-Grade Foundation

Purpose-built for IoT edge computing. Industrial-grade, vendor-neutral, and battle-tested in factories worldwide — now purpose-built for agriculture.

Fleet Management & Analytics

VCLOUD — Manage Every Farm,
From Anywhere

One console for every edge device, every farm, every analytics dashboard, every update — all from the cloud.

Fleet Management

Register, monitor, and manage every edge device across your entire operation. Zero-touch provisioning for automatic deployment, or manual device registration for full control. Per-agent health dashboards with real-time CPU, disk, memory, and network metrics.

OTA Updates

Push updates to 200 sites overnight. Over-the-air firmware, software, and configuration updates — zero truck rolls. Roll back automatically if anything goes wrong.

Advanced Analytics

High-performance OLAP engine for time-series analytics. Configurable retention policies, SQL-powered dashboards, and real-time aggregation across your entire fleet.

AI Model Deployment

Hardware auto-probing detects the optimal AI accelerator — then deploys the best model variant. One click to push AI across your entire fleet.

App Deployment

Containerized application deployment with hardware-aware variants. Deploy apps to specific device profiles — ARM, x86, with or without GPU — automatically.

Multi-Tenancy & RBAC

Isolated tenants with full role-based access control. Service providers, cooperatives, and enterprise customers each get their own siloed environment with granular permissions.

Remote Troubleshooting

Interactive terminal access, SSH tunneling, and encrypted remote sessions directly from the cloud console. Diagnose and fix issues without stepping foot on the farm.

Automation Deployment

Design and deploy complex automation flows to edge devices from the cloud console. Cloud operators maintain full control — these automations cannot be edited or deleted by mobile app users.

Digital Twins

Every physical device has a cloud twin — state, properties, and events sync bidirectionally between edge and cloud. Real-time visibility into every asset across your fleet.

Mobile App

VMOBILE — The Farmer's
Command Center

Full control of your farm from your pocket. Live sensor readings, instant actuator control, automation wizards, and analytics — all in one native mobile app.

Live Control

Sensors, valves, pumps, actuators — toggle, adjust, and monitor in real-time from the field.

Automation Wizard

Create automations in a guided step-by-step flow. No coding required — just set the conditions and actions.

Local History

Visualize historical sensor data stored directly on the edge device. No cloud needed.

Cloud Analytics

Advanced dashboards and aggregation powered by VCLOUD, accessible right from the app.

Sync Control

Fine-tune what data syncs to the cloud, when, and how much — full control over bandwidth and retention.

Live Sensors

Real-time readings from every connected device

Valve Control

Toggle valves, pumps, and actuators instantly

Live Camera

View camera feeds and AI-detected events

Dashboards

Local and cloud analytics in one view

Alerts

Push notifications for threshold and anomaly events

Access Control

Role-based permissions per user and tenant

AI Vision

VCam — AI Vision
for Agriculture

Turns every camera into an agronomic sensor. Real-time object detection, event search, snapshots, and recordings — powered by hardware-accelerated AI models running at the edge.

Real-time Object Detection

Livestock counting, crop health, pest detection, equipment monitoring

Event Search

Search recordings by detected events — "show me when the gate opened"

Snapshots & Recordings

Automated captures on events, continuous recording, cloud sync

Supported Hardware

Intel CPU/GPU Intel Acceleration
NVIDIA GPU NVIDIA Acceleration
Rockchip NPU RKNN Acceleration
Hailo NPU Hailo-8 / Hailo-15
Edge TPU Google Coral Accelerator

Hardware auto-detected. Optimal model variant deployed automatically via VCLOUD.

VAssist
You: How many irrigation cycles did the north field run this week?
VAssist: The north field completed 12 irrigation cycles this week. Total water usage was 4,280 litres. The average cycle duration was 14.3 minutes. I noticed a 15% increase compared to last week — soil moisture has been trending lower due to the warm spell.
You: What is the soil moisture trend in greenhouse 3?
VAssist: Greenhouse 3 soil moisture has been declining steadily over the past 5 days — from 42% to 31%. Based on current consumption rates, you'll reach the 25% threshold in approximately 2.3 days. Shall I increase the irrigation schedule?
You: Turn on the vent fans
VAssist: Done. Vent fans activated. Current greenhouse temperature is 28.4°C, target is 24°C. Fans will run until the target is reached.
AI Assistant

VAssist — The AI That
Knows Your Farm

A purpose-built AI agent with live access to sensors, actuators, cameras, telemetry history, and a knowledge base. Ask questions in plain language. Get answers grounded in your real data.

Live Data Access

Reads current sensor values, actuator states, and camera feeds in real-time.

Telemetry History

Queries historical data, identifies trends, and surfaces anomalies across any time range.

RAG Knowledge Base

Retrieval-augmented generation from crop manuals, equipment docs, and your operational playbooks.

Actuator Control

"Turn on the pumps" — VAssist executes commands with full safety guardrails.

7 LLM Providers

OpenAI, Anthropic, Google, Meta, Mistral, and more — on-device or cloud.

Marketplace

VAPPS — The App Store
for Agriculture

Containerized applications deployable to any fleet. Browse, install, and manage apps with hardware-aware variants — one click to deploy across every site.

VCam

AI Vision NVR

AI-powered network video recorder. Turns standard IP cameras into vision sensors with real-time object detection, event search, snapshots, and recordings.

Intel CPU/GPU NVIDIA GPU Rockchip NPU Hailo NPU

VAssist

AI Assistant

Your farm's AI assistant. Reads live sensor data, queries historical telemetry, executes device commands, and answers in plain language — on-device or cloud LLM.

7 LLM Providers Knowledge Base RAG

Build Your Own Apps

Package any containerized application for the Vioneta marketplace. Hardware-aware variants, automatic deployment, and fleet-wide OTA updates.

Container-based — any language, any framework

Hardware-aware variants (ARM, x86, GPU, NPU)

Deploy to filtered device groups in one action

Revenue sharing through the VAPPS marketplace

Why Vioneta

Vioneta vs. Traditional AgTech

The fundamental difference in how agriculture technology should be built.

Category
Traditional AgTech
Vioneta
Approach
Monitoring dashboards that show what happened
Automation that makes things happen
Dashboards
Cloud-only, internet required
Edge + Cloud, offline-first
Alerts
Static thresholds, human decides
AI-driven, automated response
Management
Per-farm silos
Multi-tenant fleet management
Updates
Manual site visits
Over-the-air, zero truck rolls
AI
None, or cloud-dependent add-on
Native edge AI, hardware-auto-detected
Purpose
Sell hardware/software
Build agriculture's infrastructure
Flexibility

One Platform.
Two Modes.

Same app. Same install. Different experience. The customer chooses their mode — or the platform decides based on connectivity.

Standalone Mode

Local Only

Live sensor readings and actuator control

Local automations running on the edge device

Local dashboards and historical data on the device

VCam and VAssist with on-device models — fully offline

No cloud apps, no syncing, no remote access, no advanced analytics

"Everything works. No internet needed."

Cloud-Managed Mode

Full Experience

Everything in Standalone Mode

Full VAPPS access — cloud-deployed apps on your edge device

VCam and VAssist with cloud or on-device models

Data syncing to cloud — control what syncs and when

Advanced analytics dashboards for your farm

Remote access — control your farm from anywhere

"Every feature. Accessible from anywhere."

Same app. Same install. Automatically switches based on connectivity.

Ready to Build the Future of Agriculture?

Five products. One platform. Deploy your first farm in hours, not months.

Get Started Today